Delayless noise control is achieved by our earlier generative fixed-filter active noise control (GFANC) framework through efficient coordination between the co-processor and real-time controller. However, the one-dimensional convolutional neural network (1D CNN) in the co-processor requires initial training using labelled noise datasets. Labelling noise data can be resource-intensive and may introduce some biases. In this paper, we propose an unsupervised-GFANC approach to simplify the 1D CNN training process and enhance its practicality. During training, the co-processor and real-time controller are integrated into an end-to-end differentiable ANC system. This enables us to use the accumulated squared error signal as the loss for training the 1D CNN. With this unsupervised learning paradigm, the unsupervised-GFANC method not only omits the labelling process but also exhibits better noise reduction performance compared to the supervised GFANC method in real noise experiments.

Due to the slow convergence and poor tracking ability, conventional LMS-based adaptive algorithms are less capable of handling dynamic noises. Selective fixed-filter active noise control (SFANC) can significantly reduce response time by selecting appropriate pre-trained control filters for different noises. Nonetheless, the limited number of pre-trained control filters may affect noise reduction performance, especially when the incoming noise differs much from the initial noises during pre-training. Therefore, a generative fixed-filter active noise control (GFANC) method is proposed in this paper to overcome the limitation. Based on deep learning and a perfect-reconstruction filter bank, the GFANC method only requires a few prior data (one pre-trained broadband control filter) to automatically generate suitable control filters for various noises. The efficacy of the GFANC method is demonstrated by numerical simulations on real-recorded noises.

The selective fixed-filter active noise control (SFANC) method selecting the best pre-trained control filters for various types of noise can achieve a fast response time. However, it may lead to large steady-state errors due to inaccurate filter selection and the lack of adaptability. In comparison, the filtered-X normalized least-mean-square (FxNLMS) algorithm can obtain lower steady-state errors through adaptive optimization. Nonetheless, its slow convergence has a detrimental effect on dynamic noise attenuation. Therefore, this paper proposes a hybrid SFANC-FxNLMS approach to overcome the adaptive algorithm's slow convergence and provide a better noise reduction level than the SFANC method. A lightweight one-dimensional convolutional neural network (1D CNN) is designed to automatically select the most suitable pre-trained control filter for each frame of the primary noise. Meanwhile, the FxNLMS algorithm continues to update the coefficients of the chosen pre-trained control filter at the sampling rate. Owing to the effective combination of the two algorithms, experimental results show that the hybrid SFANC-FxNLMS algorithm can achieve a rapid response time, a low noise reduction error, and a high degree of robustness.

Due to its rapid response time and a high degree of robustness, the selective fixed-filter active noise control (SFANC) method appears to be a viable candidate for widespread use in a variety of practical active noise control (ANC) systems. In comparison to conventional fixed-filter ANC methods, SFANC can select the pre-trained control filters for different types of noise. Deep learning technologies, thus, can be used in SFANC methods to enable a more flexible selection of the most appropriate control filters for attenuating various noises. Furthermore, with the assistance of a deep neural network, the selecting strategy can be learned automatically from noise data rather than through trial and error, which significantly simplifies and improves the practicability of ANC design. Therefore, this paper investigates the performance of SFANC based on different one-dimensional and two-dimensional convolutional neural networks. Additionally, we conducted comparative analyses of several network training strategies and discovered that fine-tuning could improve selection performance.